FARCOTILE F10 is a ready for use tile grout consist of cement, mineral powders, polymer and Adhesion promoters for grouting floor and wall tiles.
according to the request
Specific Gravity (Powder)
Specific Gravity (Paste)
FARCOTILE F10 is suitable for grouting every kind of stone, on wall or floor. For indoor or out door applications such as kitchens, bathrooms, swimming pools
Easy to apply, Non slump and High adhesion
Very low water absorption
Direction for Use
For an optimal of the tiles, the joints must be carefully cleaned and free from adhesive and dampened with wet sponge.
Mixing and Application
Add F10 powder to cool and clean water and stir approx. 1 minute by an electric stirrer, to a smooth and homogenous mixture. The mixture should be left about 5 minutes to settle and slightly stirred again.
The recommended air and substrate temperature is between 10 to 35°c.
Suitable for grouting joints with 3 to 15mm width
Spread the grout on to the joints, using a rubber spatula or a grouting trowel diagonally in relation to the direction of joints in such way, that joints should be completely filled. Apply the mortar within 1 hour at 25°c, Remove excess material immediately when F10 is still plastic.
After the grout is dry but not completely hardened, clean the surface with wet sponge following with dry cloth.
Other product info
FARCOTILE F10 is supplied in 5kg plastic bags.
Storage and shelf life
6 month when stored at temperatures between 5 to 35°c in dry place and unopened original package.
The SHIMISAKHTEMAN Technical Service Department is available to assist you in the correct use of our products in the field.
Office Address: No. 242, First floor, Mirdamad Blvd, Tehran, Iran
Contact Number: +98-21-27427
Factory address: East third and second, Simin Dasht Industrial Town, Shahriar Road, Karaj, Iran.
Contact number: +98-26-36670012-3-4
The company has been operating since 1972 under the management of Massoud Honarmand. Shimisakhteman holds a production license from the Ministry of Industry, Mining and Trade and has a mandatory standard certification of 2930. We have been selected as a standard sample unit every year since the 90’s.