FARCOTILE F14 is a ready for use tile grout consists of cement, mineral powders, shrinkage compensating and adhesion promoters materials.
F14 is suitable for making grouts with flowable consistency for wide (3 to 15 mm) floor joints and plastic consistency for walls.
For grouting tile, Mosaic, natural or artificial stone joints in bathrooms, kitchens and residential or administrative areas.
Easy application, Non shrink, Different colors
Easy to clean therefore suitable for bricks and decorative stones.
Direction for Use
For a grouting of the tiles, the joints must be carefully cleaned and free from adhesive and dampened with wet sponge.
Mixing and Application
Add F14 grouting to a cool and clean water and stir approx. 1 minute by an electric stirrer to a smooth and homogenous mixture. The mixture should be left about 5 minutes to settle and then slightly stirred again. The recommended air and substrate temperatureis between 10 to 35°c
Suitable for grouting joints with 3 to 15mm width
Spread the grout on to the joints, using a rubber spatula or a grouting trowel diagonally in relation to the direction of joints in such way, that joints should be completely filled. Apply the mortar within 1 hour at 25°c; remove excess material immediately when F14 is still plastic.
After the grout is dry but not completely hardened, clean the surface with wet sponge following with dry cloth.
Other product info
FARCO TILE F14 is supplied in 20kg bags.
Storage and Shelf life
6 month when stored at temperatures between 5 to 35°c in dry place and unopened original
Safety and Handling Precautions
F14 contains cement, while mixing and application use mask and wear gloves wash skin with clean water.
The SHIMISAKHTEMAN Technical Service Department is available to assist you in the correct use of our products in the field.
Office Address: No. 242, First floor, Mirdamad Blvd, Tehran, Iran
Contact Number: +98-21-27427
Factory address: East third and second, Simin Dasht Industrial Town, Shahriar Road, Karaj, Iran.
Contact number: +98-26-36670012-3-4
The company has been operating since 1972 under the management of Massoud Honarmand. Shimisakhteman holds a production license from the Ministry of Industry, Mining and Trade and has a mandatory standard certification of 2930. We have been selected as a standard sample unit every year since the 90’s.