FARCOTEK SS

Application

• Concrete Floors – Ideal for warehouses and factories
• Concrete Walls
• On most cementitious products where dusting is a problem.
• Consolidation of rain weakened concrete surfaces.
• Surface hardening on aged and dusting concrete floors etc.

Advantages

• Resists penetration of oil and chemicals and deteriorating actions of salts
• Easy to apply by brush or spray
• Improves wear resistance, Dust proofing qualities and permeability to liquids

Instruction for Use

Surface Preparation

• The concrete surface must be clean, dry and free of any contaminant or coating which may interfere with the penetration of SS.
• The new placed concrete should be cured for at least 28 days before treatment.

Mixing

Add 3 parts water to 1 part FARCOTEK SS by volume and stir until a homogenous mixture is achieved.

Consumption

• Depending on the porosity and absorption of the substrate the consumption is different.
• Allow first coat to cure and dry at least 24 hours before applying second coat. Two saturation coats are usually sufficient. However, for maximum effect on doubtful surfaces a third is recommended.

1 layer: 8-10m²/liter

2 layers: 6-9 m²/liter

3 layers: 4-6 m²/liter