FARCOPLAST P10N

Application

FARCOPLAST P10N is recommended  for use in all types of concrete including pumped, precast, silica fume , fly ash , extruded ,  prestressed, underwater, flowable and self –compacting concrete.

Advantage

• Provides a cohesive non-segregating concrete mixture.
• Produces high slump concrete at low dosage with no strength loss.
• Fast strength development.
• Reduces placing and consolidation time and labor expenses.
• Reduces curing time and faster reuse of forms.
• Improves impermeability against sulfate , chloride and water due to reduced water content.
• Improves abrasion and frost resistance by decreasing W/CM.
• Increases concrete durability, uniformity and strengths at all ages.

Method of use

• FARCOPLAST P10N is supplied ready for use and is completely miscible in water.
• It can be added in to the mixer at the same time as the mixing water.
• It should not be added directly to the cement or dry materials.
• FARCOPLAST P10N may be added at the end of mixing process by dispensing equipment or it may also be added to the concrete in a drum of ready mix truck, it should be mixed at least 1 minute per m³ of concrete at high speed.

Method of use

• FARCOPLAST P10N is supplied ready for use and is completely miscible in water.
• It can be added in to the mixer at the same time as the mixing water.
• It should not be added directly to the cement or dry materials.
• FARCOPLAST P10N may be added at the end of mixing process by dispensing equipment or it may also be added to the concrete in a drum of ready mix truck, it should be mixed at least 1 minute per m³ of concrete at high speed.