FARCOTILE F14

Application

For grouting tile, Mosaic, natural or artificial stone joints in bathrooms, kitchens and residential or administrative areas.

Advantages

• Easy application, Non shrink, Different colors
• Self leveling
• Frost resistant
• Easy to clean therefore suitable for bricks and decorative stones.

Direction for Use

Substrate Preparation

• For a grouting of the tiles, the joints must be carefully cleaned and free from adhesive and dampened with wet sponge.

Mixing and Application

• Add F14 grouting to a cool and clean water and stir approx. 1 minute by an electric stirrer to a smooth and homogenous mixture. The mixture should be left about 5 minutes to settle and then slightly stirred again. The recommended air and substrate temperatureis between 10 to 35°c

• Suitable for grouting joints with 3 to 15mm width
• Spread the grout on to the joints, using a rubber spatula or a grouting trowel diagonally in relation to the direction of joints in such way, that joints should be completely filled. Apply the mortar within 1 hour at 25°c; remove excess material immediately when F14 is still plastic.
• After the grout is dry but not completely hardened, clean the surface with wet sponge following with dry cloth.