FARCOTILE F10

Uses

FARCOTILE F10 is suitable for grouting every kind of stone, on wall or floor. For indoor or out door applications such as kitchens, bathrooms, swimming pools

Advantages

• Easy to apply, Non slump and High adhesion
• Very low water absorption
• Different colors
• Frost resistant

Direction for Use

Substrate Preparation

• For an optimal of the tiles, the joints must be carefully cleaned and free from adhesive and dampened with wet sponge.

Mixing and Application

• Add F10 powder to cool and clean water and stir approx. 1 minute by an electric stirrer, to a smooth and homogenous mixture. The mixture should be left about 5 minutes to settle and slightly stirred again.
• The recommended air and substrate temperature is between 10 to 35°c.

Suitable for grouting joints with 3 to 15mm width

• Spread the grout on to the joints, using a rubber spatula or a grouting trowel diagonally in relation to the direction of joints in such way, that joints should be completely filled. Apply the mortar within 1 hour at 25°c, Remove excess material immediately when F10 is still plastic.
• After the grout is dry but not completely hardened, clean the surface with wet sponge following with dry cloth.