Uses

• Applicable on natural and artificial stones, mosaics, brick, inside and outside to prevent undesired dirt, grease, graffiti, posters, etc.
• Easy to remove paint and dirt’s from treated surfaces.
• Recommended for treating concrete, mosaic and unglazed tiles in parking’s, Industrial kitchens and factory floorings.

Advantages

• Oil and water repellency at the same time
• Emulsion, No smell
• Permeable to water – vapor out
• Water repellency develops fast after a few hours
• Excellent resistance to alkaline attacks
• No change in the materials appearance
• Easy to apply.
• Small molecular size, penetrate substrate
• High resistance to aging agents, UV and freeze- thaw cycles.
• Water penetration resistance by capillary action.

Instruction for Use

Surface Preparation

• Wait at least 48 hours after rain, or if the wall has been cleaned with high pressure water, wait 3 days (in dry weather).

• Clean any dirt, oil, old paints, curing compound from the surface.
• Remove any defects and laitance from the surface and fill cracks wider than 0.3mm.
• It is recommended to treat the fresh masonry after 28 days.

Application

• Brushing, spraying or rolling.
• The water repellent must be applied until the surface is saturated.
• One coat is often enough, however, on very porous surfaces a second coat is necessary, apply the next when the substrate has absorbed the previous one and is no longer shiny, (wet-on-we- working).
• Cover the nonabsorbent surfaces and window frames before application.

Coverage

Depending on the nature of the substrate and absorption is 0.3 to 1.5 liter per m².