Application

FARCOPLAST P10N is recommended  for use in all types of concrete including pumped, precast, silica fume , fly ash , extruded ,  prestressed, underwater, flowable and self –compacting concrete.

Advantage

• Provides a cohesive non-segregating concrete mixture.
• Produces high slump concrete at low dosage with no strength loss.
• Fast strength development.
• Reduces placing and consolidation time and labor expenses.
• Reduces curing time and faster reuse of forms.
• Improves impermeability against sulfate , chloride and water due to reduced water content.
• Improves abrasion and frost resistance by decreasing W/CM.
• Increases concrete durability, uniformity and strengths at all ages.

Method of use

• FARCOPLAST P10N is supplied ready for use and is completely miscible in water.
• It can be added in to the mixer at the same time as the mixing water.
• It should not be added directly to the cement or dry materials.
• FARCOPLAST P10N may be added at the end of mixing process by dispensing equipment or it may also be added to the concrete in a drum of ready mix truck, it should be mixed at least 1 minute per m³ of concrete at high speed.

Method of use

• FARCOPLAST P10N is supplied ready for use and is completely miscible in water.
• It can be added in to the mixer at the same time as the mixing water.
• It should not be added directly to the cement or dry materials.
• FARCOPLAST P10N may be added at the end of mixing process by dispensing equipment or it may also be added to the concrete in a drum of ready mix truck, it should be mixed at least 1 minute per m³ of concrete at high speed.

Compatibility

With cements

FARCOPLAST P10N is suitable for use with cement replacement materials e.g. fly ash , silica fume, and blast furnace slag cement concrete.

With other Admixtues

FARCOPLAST P10N should not be premixed or used with other admixtures unless receive the approval from manufacturer.

We would recommend that SHIMISAKHTEMAN be consulted in such circumstances.

Packaging

FARCOPLAST P10N is supplied in 20kg gallons 220kg drums and 1100 kg IBC tanks.

Storage

FARCOPLAST P10N Storage is recommended to keep within the range of 5°c to 40°c. If product has frozen, thaw and agitate until completely reconstituted .

Keep out of direct sunlight.

Shelf life

12 month when P10N is kept under the recommended conditions and stored in unopened and undamaged original sealed containers.

Safety and Handling Precautions

FARCOPLAST M20 is a product classified as harmless, but in the line with general chemical handling precautions to avoid contact with skin or eyes, protective gloves and goggles should be worn.

Technical Service

The SHIMISAKHTEMAN technical Service Department is available to assist you in the concrete problems in the field and correct use of our products.