Application

• FARCOPLAST P100 is very effective in the manufacture of precast and prestressed concrete
• All concrete where the strenght must be high in short or long term.

Advantages Plastic concrete

• Improves the quality of concrete by decreasing W/CM up to 40% .
• Reduces placing and consolidation time and labor expenses.
• Reduces curing time and expenses.
• Improves appearance of formed surfaces.
• Dramatically increase early and ultimate compressive and flexural strengths.
• Faster reuse of forms
• Improve impermeability by decreasing water – cement ratio up to 40%
• Improves abrasion and frost resistance decreasing by W/CM.

Method of use

• FARCOPLAST P100 is supplied ready for use and is completely miscible in water.
• It can be added in to the mixer at the same time as the mixing water.
• It should not be added directly to the cement or dry materials .
• FARCOPLAST P100 may be added at the end of mixing process by dispensing equipment or it may also be added to the concrete in a drum of ready mix truck, it should be mixed at least 1 minute per m³ of concrete at high speed.

Dosage

• FARCOPLAST P100 is normally dosed at a rate of 300-1000gr pre 100kg of cementations materials (0.3% – 1% by weight of CM)
• Field testing is recommended to ensure proper performance.

Hardened concrete

• Inreases strength at all ages
• Increases concrete durability and uniformity
• Reduces permeability
• Reduces shrinkage

With other Admixtues :

P100 should not be premixed or used with other admixtures unless receive the approval from manufacturer.

We would recommend that SHIMISAKHTEMAN be consulted in such circumstances.

Packaging

FARCOPLAST P100 is supplied in 20kg gallons , 220kg drums and 1100kg IBC tanks..

Storage

• FARCOPLAST P100 should be kept form freezing .
• If accidentally frozen, its properties can be restored by thawing and thoroulyre – mixing by mild agitation..
• Protect from extremes of temperature
• FARCOPLAST P100 is best stored at tempratures Between 5°c and 35°c

helf life

12 month when P100 is kept under the recommended conditions and stored in unopened and undamaged original sealed containers.

Safety and Handling Precautions

FARCOPLAST P100 is a product classified as harmless but in the line with general chemical handling precautions to avoid contact with skin or eyes, protect ire gloves and goggles should be worn.

Technical Service

The SHIMISAKHTEMAN technicals service Department is available to assist you in the concrete problems in the field and correct use of our products.